MAM Easy Start™ Anti-Colic 320ml Baby Bottle 4+ months, single pack
- Flacher, weicher Sauger – wie Mamas Brust beim Stillen
- für einen einfachen Wechsel zwischen Stillen und Flasche
- Reduziert Koliken und Unwohlsein - 80 % der Mütter bestätigen weniger Koliken2
- Bio-zirkuläre Materialien3
- Einzigartige selbststerilisierende Funktion - schnell & einfach in 3 Minuten
- Einfach zu befüllen, anzuwenden & zu reinigen
1. SCHUTZKAPPE
Auslaufsicher; Schutzkappe der MAM Easy Start™ Anti-Colic Flasche auch als Messbecher verwendbar
2. SKINSOFTTM-SILIKONSAUGER
Einzigartige flache, symmetrische Form – wie Mamas Brust beim Stillen. Seidenweiche Silikonoberfläche – für ein vertrautes Gefühl beim Trinken mit der MAM Easy Start™ Anti-Colic Flasche. 94 % der Babys akzeptieren unseren Babyflaschensauger1
3. WEITE ÖFFNUNGEN
Einfach zu befüllen, anzuwenden & zu reinigen
4. BODENVENTIL
Hilft dem Baby, gleichmäßiger zu trinken und weniger Luft zu schlucken; reduziert Koliken und Unwohlsein
BIO-ZIRKULÄRE MATERIALIEN
3Alle Flaschenkomponenten, außer dem Sauger, bestehen aus Polypropylen, das auf bio-zirkuläre Materialien rückführbar ist, gemäß des ISCC PLUS zertifizierten Massenbilanzverfahrens.
Dieses Produkt entspricht den Anforderungen der europäischen Norm EN 14350:2020.
Der Flaschensauger ist mit allen MAM Flaschen und dem Trainer+ kompatibel.
Um die selbst-sterilisierende Funktion der MAM Easy StartTM Anti-Colic 320 ml Flasche nutzen zu können, muss der Innenraum der Mikrowelle mindestens 21 cm hoch sein (zwischen Drehteller und Heizelement).
1Marktforschung 2010-2020, getestet mit 1.572 Babys.
2Feldstudie, Österreich 2011, getestet mit 73 Müttern von Babys mit Säuglingskoliken / Marktforschung, USA 2010, getestet mit 35 Müttern von Babys mit Säuglingskoliken.
| Age: | 4+ months |
|---|---|
| Color: | Blue, Lilac, Neutral |
| Size: | 320ml |
| Teat Material: | Silicone |
MAM Means Quality
94% teat acceptance: easily accepted by babies – for a familiar feeling
BPA & BPS Free
All MAM products are made from materials free of BPA and BPS
SkinSoft™ Silicone
MAM SkinSoft™ Silicone: easily accepted by babies – for a familiar feeling
This product has a self-sterilising function – ideal for on the go
For babies from 4 months
This product is made in Europe
Flow rate 3: perfect for breast milk and formula
¹ Market research 2009-2023, tested with 1,808 babies.
For hygiene reasons, the teats should be replaced at regular intervals. Simply check the teat each time you are about to use the bottle – especially when baby already has teeth – and replace it when the first signs of damage or weak points become apparent.
The MAM Teat is easily accepted by 94%* of babies thanks to its SkinSoft™ silicone surface and its unique flat shape, which feel so familiar to babies. This facilitates a switching between breast- and bottlefeeding.
Bottle teats are simply rinsed with water and mild cleaning agent or cleaned in the upper compartment of the dishwasher.
Self-Sterilising
- The self-sterilising feature of the Easy Start™ Bottle is proven to be effective for killing common household germs and bacteria. For the best results, please follow all instructions carefully.
- Clean thoroughly as instructed above before self-sterilising.
- After cleaning, assemble bottle parts in the following way: base with with silicone valve, teat with screw ring/collar, bottle body and lid.
Step 1: Using the scale on the bottle lid, measure 20ml of tap water and pour this into the base (with white valve)
Step 2: Place the screw ring/collar with teat on the bottle base with water. Place and rest the bottle body over this. (DO NOT SCREW DOWN).
Step 3: Place the lid on top - your bottle is now ready for self-sterilising. Set your microwave timer according to how many bottles you are simultaneously cleaning. Set microwave from 500 to 1000 Watts.
- After self-sterilising allow bottle to cool down before removing from microwave.
- Recommended cooling time at least 10 minutes with opened microwave door. Be careful to hold the base and keep the bottle straight when removing from the microwave to avoid spilling any left over hot water.
- After the process is complete, if the bottle is left as assembled in step 3, it will remain disinfected for up to 48 hours. When self-sterilising on the go, you should self-sterilise, assemble your bottle and make up your feed straight after self-sterilising.
- After cooling time and using the bottle straight away: remove from the microwave and pour away any leftover water carefully. Shake parts to remove excess water.
- When Assembling do not worry about some water remaining on the bottle parts, this has been disinfected.
- Follow the user manual instructions for your microwave/device.
- Ensure that all parts from the self-sterilising bottle and microwave (including waveguide cover and turntable) are COMPLETELY clean and free from dirt, food residue, fat or oil splashes. If not this could lead to the product melting, the microwave sparking or the waveguide cover burning!
- The self-sterilising bottle should always be placed on the outer sides of the turn plate, and not in the centre of the plate as this could result in uneven heat distribution for disinfection.
- Do not leave your microwave unattended during the sterilising process.
- Never self-sterilise your bottle without water or incorrect water level; please be sure to use exactly 20mls of tap water.
- Always set the microwave to the correct power and time. If using a combination microwave, ensure the bottle is not exposed to the heat of the grill because this will damage it.
Manual MAM Easy Start
Other questions?
Send us a message and we’ll get back to you shortly.
WRITE A MESSAGE
